The Bike Grab

Wheel Chock - Bike Park - Bike Stand 

Don't take chances with your bike!
 
Keep it Safe & Sound with Bike-Grab
Bike-Grab™ Patent Pending

Independent Product Evaluation

Bike-Grab - Your Motorcycle's New Best Friend...

Designed as a single product, Bike-Grab is an automatic wheel chock, motorbike stand,
security anchoring device and showroom space saver. Bike-Grab is a compact, advanced
engineering design that embodies the laws of physics to do its work

Shipped with easily adjustable rear and front tyre side plates, Bike-Grab can handle
any size tyre from 80mm to 210mm wide.

PLEASE NOTE:  Tyres BELOW 110mm require our 'Reducer Kit'

For a very long time, motorcycle owners have wished for a more secure and easier way to
work on, park, trailer, display and lock-up their motorcycles. No single product available
anywhere could properly fill that need, until now, with Bike-Grab.

For example, other than riding, most people move their bikes from place to location by throwing
 them in the back of a pickup truck or strapping them down on top of a trailer. Typically, they strap
down their bike via the handgrips and over-tension the straps 'just to be sure'; this causes the bike's
suspension to be excessively compressed and become susceptible to wheel and fork alignment
problems. There is also the very real likelihood that the bike can suffer premature fork seal failure
and uneven tire wear.

With Bike-Grab you simply roll your front or rear wheel up and over a small built-in ramp and
into apair of adjustable side plates. At the same time, the tyre above axle level is held vice like
by our unique "V" shaped capture tube.

After a simple settling shake on the handlebars, Bike-Grab, utilizing the motorcycles own
 weight, firmly holds the bike perfectly straight up and down. There is no need to compress the
bike suspension at all! Although Bike-Grab holds on like an alligator, we still recommend and
require the use of safety straps to maintain stability whilst in transit. Customers must refer to
our safety and use instruction sheet prior to first use. 

Bike-Grab is a space saver. Customers and dealers who are short on available storage/display
space can receive big rewards with Bike-Grab. 

Compared to a bike leaning on its side stand, motorcycles resting safely in Bike-Grab can use
up to 20% less floor space!

With its unique footprint design, Bike-Grab quite literally prevents accidental tip overs.
Countless motorcycle dealers can recall horror stories about prospective customers who
accidentally retracted kick stands on a brand new models! As an economical, unobtrusive
bike stand, dealers can now prevent accidental 'tip-overs' and allow their customers to freely
try a new model's riding position with their feet firmly planted on both rests at the same
time. A dealer can also rearrange a showroom faster and easier with Bike-Grab

Motorcycle theft is on the rise and so are the costs associated with it like insurance and
owner's anxiety. Bolted solidly to the floor, Bike-Grab can serve as a handy parking post
ready for use with the user's favorite locking attachment.

As a security device and as a theft deterrent, Bike-Grab owners can go to sleep at night
with complete confidence that their bike will be there in the morning.

You can even bolt it firmly to the floor of your driveway, trailer or van.

When it comes to a pair of steady helping hands, Bike-Grab has no equal. 

It safely and firmly holds a motorcycle straight up a down, and even raises the front or rear end a tad.
This makes sliding of our EazyRizer™ portable motorcycle lift underneath the bike even easier.

 "Existing and future EazyRizer customers will love our new Bike-Grab product. This device
simply represents that extra pair of helping hands our weekend warriors and professional
motorcycle mechanics like to have around all the time" quoted John Brown, President of 
Driven Gear, Inc - Bike-Grab's North American Distributor. 

Bike-Grab is also at home in the workshop, whether its holding your bike firmly while you jack-up
the front wheel, or securing it on your workbench.

KEY FEATURES & BENEFITS.

Portable: Bike-Grab can simply be picked up and moved from the garage, to the trailer, to the
shop floor, to the racetrack, to the showroom.

Ease of Use: Simply roll the front or rear wheel over the small built-in ramp and let it fall into the
capture tubes, give the handle bars a good settling wiggle and Bike-Grab firmly holds your bike up
automatically.

Adjustable: Shipped complete with easily adjustable front and rear tyre side plates, Bike-Grab can
handle any size tyre from 80mm to 210mm wide, although with our new 2004 model, tyres
LESS THAN 110mm require our 'Reducer Kit' 

Security: Bolted solidly to the floor, Bike-Grab can serve as an ideal parking post.

Free-Suspension Trailering: A simple roll-up and wiggle procedure will firmly hold a motorcycle
without the need to extend the side stand. With the use of properly placed tie down straps,
suspension compression is minimized to prevent alignment twisting and premature seal failure.
It is also easier and much safer to tie-down or remove a bike when it can stand up straight
unaided by its owner.

Space Saver: Whether displaying bikes in a dealership showroom or parking them in your garage,
Bike-Grab reduces the amount of floor space needed, when compared to a bike resting on its kick stand,
by up to 20%.

Anti-Tip-Over: Bike-Grab was designed to prevent accidental tip overs and expensive repair bills.
All of us have felt the anxiety of, or witnessed a bike or multiple bikes falling over. It could 
happen every time a motorcycle is parked - but not with Bike-Grab.

An Extra Pair of Helping Hands: It is nice to know that Bike-Grab can hold a bike safely by itself
without any fear of falling over. A great accessory for use with our EazyRizer - motorcycle lift.

Lifetime Warranty: Lifetime Product with a Lifetime Mechanical Warranty.

Affordable: The Bike-Grab is an affordable "gotta-have-it" product for anyone who takes
pride in their motorcycle and enjoys tinkering, detailing, showing, trailering and safely
parking their bikes. Discounts are available for large quantities.

Official Instruction Sheet
Congratulations and Thank You for purchasing this innovative and extremely versatile motorcycle stand that can be used either freestanding or anchored down, just about anywhere and on any bike imaginable (ancient or modern). 

Bike-Grab has a robust, unit construction steel frame that offers maximum stability under any load; the unique design employs gravity to keep the bike firmly upright and in place.
Bike-Grab offers the choice of front or rear wheel parking and;
Fits all tyre sizes up to 200 millimetres wide !

 REMEMBER: Tyres LESS THAN 110mm require our 'Reducer Kit' 

When bolted to the ground it becomes an obvious asset to security, simply ride the bike on,
Get off and LOCK in place.

As with all Quasar products you have an unconditional "lifetime" warranty.

Remove packaging and check contents,

Mainframe x1
Front wheel plates x2 
Rear wheel plates x2 
M8 HT coach bolts x4 
Anti slip pad x1

1. Position Bike-Grab with the ramp toward you and select the wheel plates of your choice, Front (large), Rear (small).

2. With the 'lead in' edge of the plate nearest to you and facing outwards locate them on the ramp plate.

3. Assemble using the four M8 coach bolts c/w M10 washers placed directly under the bolt heads fitting them upwards through the ramp slots and the holes in the wheel plates, now locate the 4x M8 washers and M8 locking nuts. 

4. When using on smooth surfaces the anti slip pad is provided to stop sliding this can also be arrested by placing a rubber foot mat under the stand.

5. Determine the width of your tyre and set the inner edge of the wheel plates to the corresponding position on the measuring scale. (Note, tyre sizes will vary according to make so ensure the plates are always adjusted to close contact with the tyre).

6. Lock the four M8 bolts securely with a 13mm wrench.

7. The stand is now ready for operation.

8. Position Bike-Grab directly in-line with the appropriate wheel and roll the bike home. Always take time and practice a little to become proficient in use, as rolling the bike up onto the plates instead of between them can cause a sudden shift in weight and un-balance the bike!

9. When used for transportation, bolted down in your trailer or van be sure to securely fasten the bike down with tie straps.

Your bike has never been this safe before, wise choice. 

How To Contact Us :

Quasar Products Limited.
2c Mariner,
Lichfield Road Industrial Estate,
Tamworth,
ENGLAND
B79 7UL

Email: Dave@on-bike.com
Tel:  +44 (0)1827 61754
Fax:  +44 (0)1827 61677